Introduction

This guide explains how to create and save active noise‑cancelling (ANC) presets using the companion app for most modern true‑wireless earbuds. Readers will learn how to access the ANC settings, adjust frequency bands, and sync the custom profile to the earbuds on both iPhone and Android platforms. Understanding these steps enables users to tailor noise reduction to specific environments such as offices, airplanes, or noisy streets. The result is a personalized listening experience that maximises comfort and audio fidelity.

What You’ll Need

• Smartphone running iOS 13+ or Android 8.0+
• Bluetooth‑enabled true‑wireless earbuds with an official companion app
• Stable internet connection for app download and firmware updates
• Optional: Peace&Quiet Wax Earplugs for testing ANC performance in noisy environments
• Optional: PROHEAR Shooting Ear Protection Muffs for protecting hearing while evaluating high‑volume test tones

Step 1: Open the Earbud App and Access ANC Settings

Launch the official app that corresponds to the earbuds; common examples include the "SoundCore" app for SoundCore models or the "Sony Headphones Connect" app for Sony devices. Navigate to the "Settings" tab and locate the subsection labelled "Active Noise Cancelling" or simply "ANC". If the app requests permission to access Bluetooth or location services, grant the permission to ensure proper device discovery. At this stage, consider using Peace&Quiet Wax Earplugs to simulate a noisy background and verify that the ANC toggle responds correctly.

Step 2: Create a New ANC Preset

Within the ANC menu, look for a button or icon labelled "Add Preset", "New Profile", or a plus sign. Tap the control to open a blank preset screen where frequency sliders, mode selectors, and naming fields appear. Assign a descriptive name such as "Office Focus" or "Travel Quiet" to facilitate future retrieval. Confirm the creation by pressing "Save"; the app will now list the new preset alongside any default profiles.

Step 3: Adjust Frequency Bands and Save the Preset

Most modern apps provide a graphical equaliser with multiple frequency bands that influence how the ANC algorithm attenuates specific sound ranges. For a typical office environment, reduce low‑frequency rumble (40‑80 Hz) by 3‑5 dB while preserving mid‑range speech clarity (500‑2000 Hz). In a travel scenario, increase high‑frequency attenuation (8000‑12000 Hz) to minimise cabin engine noise. After adjusting the sliders, press the "Apply" or "Save" button to store the configuration within the preset. Use PROHEAR Shooting Ear Protection Muffs to safely listen to test tones at higher volumes without risking hearing damage.

Step 4: Sync the Preset to Your Earbuds

Return to the main screen of the app and locate the "Sync" or "Upload" option, often represented by a cloud icon. Ensure that the earbuds remain within the Bluetooth range of the smartphone; a distance of less than one metre is recommended for reliable transfer. Initiate the sync process; the app will display a progress bar and confirm completion with a toast message such as "Preset synced successfully". If the sync fails, restart both the app and the earbuds, then repeat the procedure.

Step 5: Verify and Fine‑Tune the Preset

Put the earbuds in the ears and activate the newly saved preset by selecting it from the app or using a physical button on the earbuds if supported. Walk through a typical environment and assess whether unwanted background sounds are sufficiently reduced. If residual noise persists, return to the ANC settings and make incremental adjustments of 1‑2 dB per band. Save the changes and re‑sync; repeat the verification cycle until the desired balance is achieved.

Tips & Pro Tips

• Keep the app updated; manufacturers frequently release firmware that expands ANC customization options.
• Use a consistent testing environment when comparing presets; ambient noise levels can vary dramatically between rooms.
• When travelling, create a "Quiet Cabin" preset that maximises high‑frequency attenuation to counteract aircraft engine hum.
• Pair the earbuds with a device that supports high‑resolution audio to experience the full benefit of customised ANC.
• For precise measurement, employ a sound level meter app on the smartphone while wearing Peace&Quiet Wax Earplugs to gauge the reduction achieved by each preset.

Troubleshooting

Problem	Possible Cause	Solution
Preset does not appear on earbuds	Sync failed due to Bluetooth interference	Turn off other Bluetooth devices, restart the smartphone, and repeat the sync step.
ANC sound becomes distorted	Excessive attenuation on multiple frequency bands	Reduce the attenuation amount and test again; avoid lowering more than 10 dB on any single band.
App crashes when opening ANC menu	Outdated app version or corrupted cache	Uninstall and reinstall the app, then clear the cache before launching.

Conclusion

By following the steps outlined in this guide, users can confidently create, save, and synchronise custom ANC presets on both iPhone and Android devices. Tailoring the noise‑cancelling profile to specific scenarios enhances listening comfort and protects hearing over long periods. The optional tools—Peace&Quiet Wax Earplugs and PROHEAR Shooting Ear Protection Muffs—provide reliable ways to evaluate ANC performance without compromising safety. Readers are encouraged to experiment with multiple presets and share their configurations with the community for continuous improvement.

Products Mentioned in This Guide

Frequently Asked Questions

How do I access ANC settings in the earbud companion app?

Open the app, navigate to Settings → ANC, and tap “Customize” to view the frequency sliders.

Can I create multiple ANC presets for different environments?

Yes, you can save up to three custom profiles and label them (e.g., Office, Plane, Street).

How do I sync a newly created ANC preset to my earbuds?

After adjusting the bands, tap “Save” then “Apply” or “Sync”; the earbuds update automatically over Bluetooth.

Are the steps the same on iPhone and Android devices?

The app’s layout is identical on iOS 13+ and Android 8.0+, so creating and saving presets follows the same process.

Do I need any extra tools to test my ANC settings?

Optional earplugs or hearing‑protection muffs can help evaluate performance, but the app’s built‑in test tone is sufficient for basic checks.